Emergency Rescue Clothing Summer

1 It conforms to the standard of XF633-2006 Firefighters' Protective Ensemble for Rescue, and provides the test report issued by the National Fire Equipment Quality Supervision and Inspection Center or the testing institutions of national certification and accreditation (with testing qualifications, and provide the query results from the information public service platform of national certification and accreditation ).
2 It is composed of jacket and pants, which are anti-static, flame-retardant and wear-resistant. It is a special clothing worn by firefighters for rescue operations, and provides protection for the trunk, neck, arms, wrists and legs.
3 The overlap part of jacket and pants is ≥ 120mm. The jacket adopts a waist retracting design. The shirt-style arc-shaped hem. The front hem should be able to be tied into the waist of the trousers, and the rear hem should not slide out of the waist when bending. The front and back length difference of jacket is 30-50mm. The collar is a stand-up collar, which can cover the neck when the collar is upright, and the placket is closed with a zipper.
4 The fabric is made of aramid fiber and flame-retardant viscose fiber, and the main components are aramid fiber and conductive fiber.
5 Orange red, Pantone number is 17-1456 TCX tigerlily; dark flame blue, Pantone number is 19-3938 TCX, color difference is ≥ grade 3.
6 A V-shaped yellow-silver-yellow reflective sign tape is set at the front chest, a horizontal yellow-silver-yellow reflective sign tape is set at the back, and a surrounding yellow-silver-yellow reflective sign tape is set at the cuffs and feet. 
7 The left and right shoulder tabs are provided. The shoulder and back of the jacket are spliced with deep flame blue fabric. A baggy patch bag is set at the bottom hem of the jacket, and the bag cover is dark flame blue. Baggy patch bags are arranged on both sides of the thigh. 
8 The cuffs are tightened with magic tapes to facilitate the wearing of rescue gloves. The leg opening is provided with a magic tape for tightening, which is convenient to wear and take off the rescue boots. The shoulder, elbow, knee, hip and crotch are thickened to increase wear resistance.
9 A 90mm×110mm shield-type Velcro with a shield-type logo is installed on the outer side of the left upper arm. The left chest is equipped with the same shape of Velcro as 19 fire soft badge, which is used to affix the 19 firefighter soft badge or 19 fire officer soft badge. The right chest is equipped with 90mm×57mm rectangular Velcro and fire commanders chest logo. 
10 The cap is a baseball cap style, with 19 fire soft Cap badges (the bottom color of the cap badge is orange) in the front and snap adjustment loops in the rear. The head circumference is 520-640 mm. The size of the cap badge: length × height is 53.5mm × 55mm.
11 Insert woven waistband is used together with the rescue suit. Waistband specification: length × width × thickness: 1300mm × 50mm × 2.8mm.
12 Mass per unit area of outer fabric is ≥ 200g/ . Damage length is ≤ 100mm, afterburning time ≤ 2S, no melting droplet. Spray rating ≥ 3; Breaking strength of  wrap and weft are respectively ≥ 350N. Tear strength of  wrap and weft are ≥ 25N. After the thermal stability test at (180 ± 5) ºC, the dimensional change rate of  wrap and weft shall not be greater than 5%, and there shall be no obvious change on the surface of the sample. The electrification of the whole set of rescue suit is ≤ 0.6uC. The density of sewing needle pitch ≥ 12 stitches /3cm. After the thermal stability test at (180 ± 5) ºC, the sewing thread has no melting and shrinkage.
13 The surface of all hard accessories shall be smooth without burrs and sharp edges, and the hardware shall be subject to anti-corrosion treatment.
14 The appearance identification shall be implemented in accordance with The Uniformed Requirements for Style and Identification of Type 20 Fireman's Protective Clothing for Firefighting issued by the Fire Rescue Bureau of the Emergency Management Department.
15 The product shall have clear and durable signs (executive standard, model and specification; name or trademark of the manufacturer; identification number of the manufacturer and manufacturing time ) and RFID chips (the contents shall be filled in according to the needs of the purchaser)